M3 7-pin Quick Release Cable System - Complete Sets

Engh7-pin Quick Release Cable Sets

 

The Peter Engh M3 7-pin Quick Release Cable System is designed to connect field mixer or recorder outputs to camera inputs with a 7-pin connector “break point”. The cable system also sends a monitor return back to the mixer and most often a courtesy monitor tap for the cameraman. The available Mixer Ends and Camera Ends will accommodate almost every professional mixer, recorder and camera on the market.

The Peter Engh M3 7-pin Quick Release Cable System is the most complete and robust “Breakaway” cable system available. Not only does the system account for sending and receiving audio from a field mixer to a camera but allows the integration of Lectrosonics wireless links, extension cables and most notably - the SPILTMON 3 three camera splitter. Each and every cable is meticulously hand crafted to uncompromising standards using only the highest quality components.

 

XLR 7-pin?

Unlike common breakaway snakes the M3 system uniquely uses XLR 7-pin connections due to their superb durability.

Peter Engh M3 7-pin Quick Release Cable System features:

  • Neutrik® 7-pin connections on Quick Release points for maximum durability and ease of use
  • Mixer Ends, Recorder Ends and Camera Ends to interface with all the most popular equipment
  • Allows for the addition of 7-pin Extension cables to adapt to all setup challenges
  • Allows for three camera shoots with transformer isolation, monitor returns and ground lists with the SPLITMON 3
  • Can go wireless with the addition of an RF-2X and RF-2R, 7-pin to Lectrosonics TX and RX
  • Ultra-tough, Mogami 2602 multicore cable
  • Neutrik® XX and X Series XLR connectors
  • Black cable, Black connector shells with gold pins
  • Handcrafted in USA by Peter Engh

ENGH M3 7-pin Quick Release Cable System

Basic setups of field mixer to single camera

 

 

Sets For Sound Devices 664, 552, 442 etc. (Hirose 10-pin connector) to various cameras

PE-1002

M3 7-pin Set, 18’ Hirose 10-pin Mixer End and 34” Standard Camera End (Stereo Headphone Tap*)

PE-1012

M3 7-pin Set, 18’ Hirose 10-pin Mixer End and 30.5” Digital Camera End

PE-1043

M3 7-pin Set, 18’ Hirose 10-pin Mixer End and 27.5” Arri Alexa Camera End

PE-1055

M3 7-pin Set, 18’ Hirose 10-pin Mixer End & 33.5” Sony F5/55 Camera End

 

*Standard Camera Ends have a Stereo Mini Courtesy Tap for the cameraman - Mono Tap available by request

 

 

 

Sets For Sound Devices 633, 302, MixPre, Shure FP-33 etc. (XLR-3) to various cameras

PE-1000

M3 7-pin Set, 18’ (2) XLR-3F Mixer End and 34” Standard Camera End (Stereo Headphone Tap*)

PE-1011

M3 7-pin Set, 18’ (2) XLR-3F Mixer End and 30.5” Digital Camera End

PE-1048

M3 7-pin Set, 18’ (2) XLR-3F Mixer End & 27.5” Arri Alexa Camera End

PE-1056

M3 7-pin Set, 18’ (2) XLR-3F Mixer End and 33.5” Sony F5/55 Camera End

 

*Standard Camera Ends have a Stereo Mini Courtesy Tap for the cameraman - Mono Tap available by request

 

 

M3-18 Set, HRS 10-pin to Standard Camera
Code: PE-1002

Mixer End: The 10-pin Hirose Mixer End is 18' in length.

Camera End: The most common Camera End - works with a large variety of cameras. 34" XLR-7F to (2) XLR 3-pin Male [L/R}. The attached 3.5mm mini TRS Stereo jack plugs into the camera headphone jack to send playback audio to the audio mixer. Has a receptacle for the cameraman to plug his headphones in.

Use with Sound Devices 664, 552, 442 etc. w/ camera with (2) XLR-3 balanced inputs and headphone jack

   

This Set includes these two components

 

M3 Mixer End with Hirose 10-pin to XLR-7M

 

The Standard Camera End in the ENGH 7-pin System provides a
7-pin female to (2) XLR 3-pin Male L/R and a 3.5mm TRS headphone send with courtesy feed for cameraman.
   
   
   
H10-DIGI

M3-18 Set, HRS 10-pin to Digital Camera
Code: PE-1012

Mixer End: The 10-pin Hirose Mixer End is 18' in length.

Camera End: Use with the new crop Digital camcorders with an XLR-5 o/p or Sound Devices PIX video recorders. 30.5" XLR-7F to (2) XLR 3-pin Male [L/R}. Return Monitor via XLR 5-pin. Camera Operator Listen: Use camera headphone jack

Use with Sound Devices 664, 552, 442 etc. w/ camera with (2) XLR-3 balanced inputs and XLR 5-pin o/p  
   

This Set includes these two components

 
M3 Mixer End with Hirose 10-pin to XLR-7M The Digital Camera End in the ENGH 7-pin System provides a
7-pin female to (2) XLR 3-pin Male L/R and a XLR 5-pin to send playback to mixer.
   
   
   
H10-DIGI

M3-18 Set, HRS 10-pin to Arri Alexa
Code: PE-1043

Mixer End: The 10-pin Hirose Mixer End is 18' in length.

Camera End: Specific to the Arri Alexa camera - the 27.5" length is carefully selected to fit perfectly.
To camera inputs: XLR 5-pin Male, right angle
Return Monitor: 3.5mm Stereo TRS Male, right angle
Camera Operator Listen: None, considered “double-system” camera

Use with Sound Devices 664, 552, 442 etc. w/ Arri Alexa camera  
   

This Set includes these two components

 
 ArriAlexa
M3 Mixer End with Hirose 10-pin to XLR-7M The Alexa Camera End in the ENGH 7-pin System provides a
7-pin female to XLR 5-pin Male Right Angle w/ 3.5mm TRS headphone send
   
   
   
H10-DIGI

M3-18 Set, HRS 10-pin to Sony F5/55 Camera
Code: PE-1055

Mixer End: The 10-pin Hirose Mixer End is 18' in length.

Camera End: Specifically for Sony F5/55 cameras. 33.5" XLR-7F to (2) XLR 3-pin Male RA[L/R}. The attached 3.5mm mini TRS Stereo jack plugs into the camera headphone jack to send playback audio to the audio mixer. Has a receptacle for the cameraman to plug his headphones in.

Use with Sound Devices 664, 552, 442 etc. w/ Sony F5/55 cameras  
   

This Set includes these two components

 
M3 Mixer End with Hirose 10-pin to XLR-7M The Sony F5/55 Camera End in the ENGH 7-pin System provides a 7-pin female to (2) XLR 3-pin Male L/R RA and a 3.5mm TRS headphone send with courtesy feed for cameraman.
   
   
   

M3-18 Set, XLR to Standard Camera
Code: PE-1000

Mixer End: The XLR-3 Mixer End is 18' in length.

Camera End: The most common Camera End - works with a large variety of cameras. 34" XLR-7F to (2) XLR 3-pin Male [L/R}. The attached 3.5mm mini TRS Stereo jack plugs into the camera headphone jack to send playback audio to the audio mixer. Has a receptacle for the cameraman to plug his headphones in.

  For Sound Devices 633, 302, MixPre-D, MixPre, Shure FP-33, Wendt X3, Fostex FM-3, FM-4, PSC DV Promix 6 and more...
w/ camera with (2) XLR-3 balanced inputs and headphone jack
   

This Set includes these two components

 
M3 Mixer End with Hirose XLR 3-pin and
Mini Return to XLR-7M
The Standard Camera End in the ENGH 7-pin System provides a
7-pin female to (2) XLR 3-pin Male L/R and a 3.5mm TRS headphone send with courtesy feed for cameraman.
   
 

 

   

M3-18 Set, XLR to Digital Camera
Code: PE-1011

Mixer End: The XLR-3 Mixer End is 18' in length.

Camera End: Use with the new crop Digital camcorders with an XLR-5 o/p or Sound Devices PIX video recorders. 30.5" XLR-7F to (2) XLR 3-pin Male [L/R}. Return Monitor via XLR 5-pin. Camera Operator Listen: Use camera headphone jack

  For Sound Devices 633, 302, MixPre-D, MixPre, Shure FP-33, Wendt X3, Fostex FM-3, FM-4, PSC DV Promix 6 and more...
w/ camera with (2) XLR-3 balanced inputs and headphone jack
   

This Set includes these two components

 
M3 Mixer End with Hirose XLR 3-pin and
Mini Return to XLR-7M
The Digital Camera End in the ENGH 7-pin System provides a
7-pin female to (2) XLR 3-pin Male L/R and a XLR 5-pin to send playback to mixer.
   
   
   

M3-18 Set, XLR to Arri Alexa Camera
Code: PE-1048

Mixer End: The XLR-3 Mixer End is 18' in length.

Camera End: Specific to the Arri Alexa camera - the 27.5" length is carefully selected to fit perfectly.
To camera inputs: XLR 5-pin Male, right angle
Return Monitor: 3.5mm Stereo TRS Male, right angle
Camera Operator Listen: None, considered “double-system” camera

  For Sound Devices 633, 302, MixPre-D, MixPre, Shure FP-33, Wendt X3, Fostex FM-3, FM-4, PSC DV Promix 6 and more...
w/ camera with (2) XLR-3 balanced inputs and headphone jack
   

This Set includes these two components

 
ArriAlexa
M3 Mixer End with Hirose XLR 3-pin and
Mini Return to XLR-7M
The Alexa Camera End in the ENGH 7-pin System provides a
7-pin female to XLR 5-pin Male Right Angle w/ 3.5mm TRS headphone send
   
   
   

M3-18 Set, XLR to Sony F5/F55 Camera
Code: PE-1056

Mixer End: The XLR-3 Mixer End is 18' in length.

Camera End: Specifically for Sony F5/55 cameras. 33.5" XLR-7F to (2) XLR 3-pin Male RA[L/R}. The attached 3.5mm mini TRS Stereo jack plugs into the camera headphone jack to send playback audio to the audio mixer. Has a receptacle for the cameraman to plug his headphones in.

H10-DIGI

  For Sound Devices 633, 302, MixPre-D, MixPre, Shure FP-33, Wendt X3, Fostex FM-3, FM-4, PSC DV Promix 6 and more...
w/ camera with (2) XLR-3 balanced inputs and headphone jack
   

This Set includes these two components

 
M3 Mixer End with Hirose XLR 3-pin and
Mini Return to XLR-7M
The Sony F5/55 Camera End in the ENGH 7-pin System provides a 7-pin female to (2) XLR 3-pin Male L/R RA and a 3.5mm TRS headphone send with courtesy feed for cameraman.