M3 7-pin MIXER ENDS

EnghM3 7-pin MIXER ENDS

 

Mixer Ends - the first component of the M3 System to connect Mixer or Recorder outputs to a 7-pin Male connector. Mixer Ends are available individually to expand an existing ENGH Quick Release System, e.g. you have a 7-pin Set for a Sound Devices 302 and Standard Camera and now have added a 664 mixer to your sound kit. You only need to obtain the Mixer End for the 552 to integrate with all your existing 7-pin cabling. The available Mixer Ends will accommodate almost every professional mixer or recorder currently on the market.

The Peter Engh M3 7-pin Quick Release Cable System is designed to connect field mixer or recorder outputs to camera inputs with a 7-pin connector “break point”. The cable system also sends a monitor return back to the mixer and most often a courtesy monitor tap for the cameraman. The available Mixer Ends and Camera Ends will accommodate almost every professional mixer, recorder and camera on the market.

 

XLR 7-pin?

Unlike common breakaway snakes the M3 system uniquely uses XLR 7-pin connections due to their superb durability.

Peter Engh M3 7-pin Quick Release Mixer Ends feature:

  • Neutrik® 7-pin connections on Quick Release points for maximum durability and ease of use
  • Mixer Ends and Recorder Ends to interface with all the most popular equipment, e.g. Sound Devices & Zaxcom
  • Allows for the addition of 7-pin Extension cables to adapt to all setup challenges
  • Allows for three camera shoots with transformer isolation, monitor returns and ground lists with the SPLITMON 3
  • Can go wireless with the addition of an RF-2X and RF-2R, 7-pin to Lectrosonics TX and RX
  • Ultra-tough, Mogami 2602 multicore cable
  • Neutrik® XX and X Series XLR connectors
  • Black cable, Black connector shells with gold pins
  • Handcrafted in USA by Peter Engh

M3 Mixer End, 18’
Hirose 10-pin to XLR 7-pin Male

 

Mixer outs: via 10-pin Hirose
Return Monitor: via 10-pin Hirose

For Sound Devices 664, 552, 442, Cooper CS104, PSC Alphamix and more...


   
   

M3 Mixer End, 2’
Hirose 10-pin to XLR 7-pin Male

 

Mixer outs: via 10-pin Hirose
Return Monitor: via 10-pin Hirose

Generally will require a 7-pin Extension cable. A great choice when using the ENGH RF-2X Lectrosonics Harness

For Sound Devices 664, 552, 442, Cooper CS104, PSC Alphamix and more...

   
   
   
   

M3 Mixer End, 18’
(2) XLR 3-pin to XLR 7-pin Male

 

Mixer outs: via (2) XLR 3-pin Female
Return Monitor: via Mini 3.5mm TRS

For Sound Devices 302, MixPre-D, MixPre, Shure FP-33, Wendt X3, Fostex FM-3, FM-4, PSC DV Promix 6 and more...

   
   
   

M3 Mixer End, 18’
(2) XLR 3-pin to XLR 7-pin Male

 

Mixer outs: via (2) XLR 3-pin Female
Return Monitor: via Mini 3.5mm TRS

Generally will require a 7-pin Extension cable. A great choice when using the ENGH RF-2X Lectrosonics Harness

For Sound Devices 302, MixPre-D, MixPre, Shure FP-33, Wendt X3, Fostex FM-3, FM-4, PSC DV Promix 6 and more...

   
   
   
   

M3 Recorder End, Zaxcom Nomad, 18’
(2) XLR 3-pin to XLR 7-pin Male

 

Mixer outs: via (2) XLR 3-pin Female
Return Monitor: via TA5F

For Zaxcom Nomad

 

   
   
   
   

M3 Recorder End, Sound Devices 788T, 18’
(2) TA3F to XLR 7-pin Male

 

Recorder outs: via (2) TA3F, Balanced
Return Monitor: via (2) TA3F, Balanced

For Sound Devices 788T

 

   

 

 

PE-1013

18’, M3 Mixer End only, Hirose 10-pin to XLR 7-pin Male

PE-1041

2’, M3 Mixer End only, Hirose 10-pin to XLR 7-pin Male

PE-1008

18’, M3 Mixer End only, (2) XLR 3-pin Female w/ 3.5mm TRS Mini return to XLR 7-pin Male

PE-1009

2’, M3 Mixer End only, (2) XLR 3-pin Female w/ 3.5mm TRS Mini return to XLR 7-pin Male

PE-1042

18’, M3 Recorder End only, (2) TA3F Balanced w/ (2) TA3F return to XLR 7-pin Male, for Sound Devices 788T

PE-1052

18’, M3 Recorder End only, (2) XLR 3-pin Female w/ TA5F return to XLR 7-pin Male, for Zaxcom Nomad

 

 

 

7-pin Quick Release Cable EXTENSIONS


Engh

 

 

M3 7-pin Extensions allow you to increase the length of your M3 Quick Release system. M3 Extensions are required when using the SPLITMON 3 box for multi camera setups and short Mixer Ends.

The Peter Engh M3 7-pin Quick Release Cable System is designed to connect field mixer or recorder outputs to camera inputs with a 7-pin connector “break point”. The cable system also sends a monitor return back to the mixer and most often a courtesy monitor tap for the cameraman. The available Mixer Ends and Camera Ends will accommodate almost every professional mixer, recorder and camera on the market.

 

Peter Engh M3 7-pin Quick Release Cable EXTENSIONS feature:

  • Allows you to adapt to all setup challenges by extending the length of your cable system
  • Neutrik® 7-pin connections on Quick Release points for maximum durability and ease of use
  • Use with all Mixer Ends, Recorder Ends and Camera Ends to interface with all the most popular equipment
  • Perfect for short Mixer Ends to keep cable loops tidy
  • Use with SPLITMON 3 on three camera shoots
  • Ultra-tough, Mogami 2602 multicore cable
  • Neutrik® XX and X Series XLR connectors
  • Black cable, Black connector shells with gold pins
  • Handcrafted in USA by Peter Engh


 

 

M3-50X

50’ 7-pin Extension Cable for M3 7-pin Quick Release Cable System, XLR 7-pin Female to XLR 7-pin Male

M3-30X

30’ 7-pin Extension Cable for M3 7-pin Quick Release Cable System, XLR 7-pin Female to XLR 7-pin Male

M3-25X

25’ 7-pin Extension Cable for M3 7-pin Quick Release Cable System, XLR 7-pin Female to XLR 7-pin Male

M3-18X

18’ 7-pin Extension Cable for M3 7-pin Quick Release Cable System, XLR 7-pin Female to XLR 7-pin Male