M3 7-pin Camera ENDS

EnghM3 7-pin CAMERA ENDS

 

Camera Ends - with a 7-pin Female connector, Camera Ends attach to a Mixer End or 7-pin Extension to feed audio to the camera’s inputs. It also sends a monitor return back to the field mixer and generally provides a monitor headphone tap for the cameraman. Camera Ends may be purchased individually to expand an existing ENGH Quick Release System, e.g. you have a 7-pin Set with a Standard Camera and now are working with an Arri Alexa camera. You only need to obtain this Camera End to integrate with all your existing 7-pin cabling.

The Peter Engh M3 7-pin Quick Release Cable System is designed to connect field mixer or recorder outputs to camera inputs with a 7-pin connector “break point”. The cable system also sends a monitor return back to the mixer and most often a courtesy monitor tap for the cameraman. The available Mixer Ends and Camera Ends will accommodate almost every professional mixer, recorder and camera on the market.

 

XLR 7-pin?

Unlike common breakaway snakes the M3 system uniquely uses XLR 7-pin connections due to their superb durability.

Peter Engh M3 7-pin Quick Release Camera Ends feature:

  • Neutrik® 7-pin connections on Quick Release points for maximum durability and ease of use
  • Camera Ends to interface with most cameras
  • Allows for the addition of 7-pin Extension cables to adapt to all setup challenges
  • Allows for three camera shoots with transformer isolation, monitor returns and ground lists with the SPLITMON 3
  • Can go wireless with the addition of an RF-2X and RF-2R, 7-pin to Lectrosonics TX and RX
  • Ultra-tough, Mogami 2602 multicore cable
  • Neutrik® XX and X Series XLR connectors
  • Black cable, Black connector shells with gold pins
  • Handcrafted in USA by Peter Engh

M3 Camera End, 34”
XLR 7-pin Female to Standard Camera

 

To camera inputs: (2) XLR 3-pin Male, L/R
Return Monitor: 3.5mm Stereo TRS Male, right angle
Camera Operator Listen: Female 3.5mm Stereo TRS Tap

The most common Camera End - works with a large variety of cameras.


   
   

M3 Camera End, 30.5”
XLR 7-pin Female to Digital Camera

 

To camera inputs: (2) XLR 3-pin Male, L/R
Return Monitor: XLR 5-pin Female
Camera Operator Listen: Use camera headphone jack

Use with the new crop Digital camcorders with an XLR-5 o/p or Sound Devices PIX video recorders.

   
   
   

M3 Camera End, 27.5”
XLR 7-pin Female to Arri Alexa Camera

 

To camera inputs: XLR 5-pin Male, right angle
Return Monitor: 3.5mm Stereo TRS Male, right angle
Camera Operator Listen: None, considered “double-system” camera

 

   
   
   

M3 Camera End, 33.5”
XLR 7-pin Female to Sony F5/F55 Camera

 

To camera inputs: (2) XLR 3-pin Male, L/R, right angle
Return Monitor Send: 3.5mm TRS Stereo Male
Camera Operator Listen: Female 3.5mm Stereo TRS Tap
Length to Red XLR is 33.5”, Length to Blue XLR is 32.5”

 

   

 

PE-1006

M3 Standard Camera End, XLR 7-pin Female to (2) XLR 3-pin Male w/ 3.5mm TRS Mini RA and TRS Tap*, 34”

PE-1024

M3 Digital Camera End, XLR 7-pin Female to (2) XLR 3-pin Male w/ XLR 5-pin Female return send, 30.5”

PE-1026

M3 Arri Alexa Camera End, XLR 7-pin Female to XLR 5-pin RA Male w/ 3.5mm TRS Mini RA return send, 27.5”

PE-1054

M3 F5/F55 Camera End, XLR 7-pin Female to (2) XLR 3-pin RA Male w/ 3.5mm TRS Mini RA and TRS Tap*, 33.5"

 

*Standard Camera Ends have a Stereo Mini Courtesy Tap for the cameraman - Mono Tap available by request