Cables for Equipment Mounted on Cameras

Hirose-4 Connector ShellOur DC power cables are used to power common equipment from various camera models that incorporate a Hirose 4-pin socket. All Hirose 4 equipped camera cables are carefully handcrafted to the highest standards using only premium components. The quality and durability of interconnect cables powering receivers off your camera is of tremendous importance for trouble free operation and the well being of your valuable gear. We use genuine Canare or molded, coax equipped ultra-flexible cable that is not hard and stiff like typical DC cables - which are prone to split and break prematurely.  

Cable Techniques DC cables can be used with devices equipped with a Hirose 4 output that complies with the relevant standard for our industry: Pin-1 Ground, Pin 4-Hot. This of course also includes our Battery Bud II, Hawk Woods systems and the extra DC outputs on the PSC Alphamix mixer for example.


CT-CAM-8-9
Specifications Compatible With

Length: 8” & 9”

Lectrosonics portable receivers like UCR401, UCR411A etc. and Lectrosonics ISO9VOLT Battery Eliminators. Also for other devices with same DC socket specifications.

Connectors: Hirose 4-pin to Right Angle coaxial barrel

5.5 mm barrel diameter
14 mm barrel length
2.1 mm internal diameter

CT-CAM-8/9

To power (2) Lectrosonics receivers on a camera equipped with Hirose 4 DC Socket

CT-CAM-9
Specifications Compatible With

Length: 9”

Lectrosonics portable receivers like UCR401, UCR411A etc. and Lectrosonics ISO9VOLT Battery Eliminators. Also for other devices with same DC socket specifications.

 

Connectors: Hirose 4-pin to Right Angle coaxial barrel

5.5 mm barrel diameter
14 mm barrel length
2.1 mm internal diameter

CT-CAM-9

To power a Lectrosonics receiver on a camera equipped with Hirose 4-pin DC socket

CT-CAMSR-9
Specifications Compatible With

Length: 9”

Lectrosonics SR receivers and SMBATELIM Battery Eliminators. Also for other devices with same DC socket specifications.

 

Connectors: Hirose 4-pin to Right Angle Locking coaxial barrel

CT-CAMSR-9

To power a Lectrosonics SR receiver on a camera equipped with Hirose 4-pin DC socket

CT-PIX-12
Specifications Compatible With

Length: 12”

Sound Devices PIX 240 and PIX 220 Video Recorders

 

Connectors: Hirose 4-pin Male to Hirose 4-pin Male

CT-PIX-12

To power a Sound Devices PIX 240 or PIX 220 mounted on a camera with Hirose 4 socket

CT-PIX-18
Specifications Compatible With

Length: 18”

Sound Devices PIX 240 and PIX 220 Video Recorders

 

Connectors: Hirose 4-pin Male to Hirose 4-pin Male

CT-PIX-18

To power a Sound Devices PIX 240 or PIX 220 mounted on a camera with Hirose 4 socket

CT-PIX-212
Specifications Compatible With

Length: 2 x 12”

Sound Devices PIX 240 and PIX 220 Video Recorders and other camera mounted equipment with Hirose 4 DC socket

 

Connectors: Hirose 4-pin Male to (2) Hirose 4-pin Male

CT-PIX-212

To power a Sound Devices PIX 240 or PIX 220 + another HRS unit mounted on a camera with Hirose 4 socket

CT-CAM-8-9
Specifications Compatible With

Length: 12"

AJA Ki-Pro recorders and other equipment with an XLR 4-pin DC socket

Connectors: Neutrik XLR 4-pin Male to Hirose 4-pin Male

 

CT-AJA-12

To power a AJA Ki-Pro mounted on a camera with Hirose 4 socket

CT-CC-6
Specifications Application

Length: 6" - 18"

Coiled cable

XLR-3F Right Angle to XLR-3M coiled camera-mounted microphone or Lectrosonics UCR Receiver cable. 6" coil, extends to 18". Ultra-tough, custom USA made coiled cable

Ideal to keep cable-slack tidy for a microphone or UCR receiver mounted on a camera

Connectors: Neutrik XLR 3-pin RA Female to XLR 3-pin Male

CT-CC-6

For a shotgun microphone or Lectrosonics UCR Receiver mounted on a camera